Xiaomi Mi 10000mAh 22.5W USB-C Two-Way Fast Charge Portable Power Bank

Rs.6,000.00 Rs.5,500.00 Save 8%
/

Product Details:

🔍 Key Specifications

Feature Details
Model / Designation PB100DPDZM (or variant in the “22.5 W” series)
Battery (Cell) 37 Wh / 3.7 V, equivalent nominally to 10000 mAh
Rated / Usable Capacity ~ 5500 mAh at 5 V / 3 A (after conversion losses)
Input USB‑C port; 5 V ⎓ 3 A, 9 V ⎓ 2.5 A
Outputs USB‑A ports + USB‑C (i.e. multiple ports)
Output / Fast Charge Up to 22.5 W max (across its ports under appropriate conditions)
Simultaneous Output It supports charging multiple devices simultaneously (three ports)
Full Recharge Time Around 4.5 hours when using a suitable fast charger (e.g. 18 W or higher)
Dimensions ~ 147.8 × 73.9 × 15.3 mm
Certifications / Protections Multiple protections: overcharge, over-discharge, short circuit, overcurrent, etc.
Operating Temperature Usually between 5 °C and 35 °C (typical operating range)

✅ Advantages & Things to Consider

Pros

  • Two‑way fast charging: You can not only fast charge your devices, but the power bank itself also recharges fast via USB‑C.

  • Multiple ports: You can charge 2–3 devices at once (USB‑C + USB‑A ports) which is quite convenient in real‑world usage.

  • Compact & portable: Though not ultra‑slim, its dimensions are reasonable for a 10000 mAh power bank.

  • Safety features: Built‑in protections increase safety for both the power bank and connected devices.

  • Good balance: 10000 mAh is a good trade‑off between capacity and portability; for many users, it offers 1+ full charge on a modern smartphone.

Cons / Limitations

  • Conversion losses / usable capacity: The “10000 mAh” is the internal cell capacity; usable output is lower (≈ 5500 mAh at 5 V) due to inefficiencies.

  • Shared output / power distribution: When charging multiple devices at once, maximum per‑device current may decrease.

  • Heat and charging conditions: As with most fast chargers / power banks, performance may taper under high temperature or cable limitations.

  • Port quality / cable quality matters: To get full 22.5 W, you need good USB‑C / USB‑C or USB‑C / USB‑A cables rated for sufficient current.

  • Throttle / safety behavior: Under heavy loads or protection triggers (e.g. overheat), it might reduce output.